Silicon PU Stadium caulk: primer after curing, silicone pu stadium, with sealant 10% -20% thinner (xylene or ethyl acetate) diluted with a brush brushing seam on both sides of the temperature, then Fold packed light foam caulk temperature seam (sealing foam is stretchable, compressible, effectively reduce the thermal expansion and contraction change on the basis of surface appearance) with portable foam caulk the exposed portion of the mill grind, again sealant with two points more than the "V" groove fill (a fill of a thickness of not more than 1.0mm, too thick foam, affect sealant performance) silicon PU Stadium seam grinding process: the temperature of the seam on both sides The base width of 40 ~ 50mm each ground beveled deep 3mm), the temperature of the surface to sew "V" type, (each 40 to 50 wide is to improve the sealant and the substrate surface adhesion area, green silicon pu stadium construction processes, increase its adhesion, Yulin silicon pu stadium construction, 3mm deep is to ensure that sealant thickness without occupying bit Ge elastic layer, ensure the overall good buffer, so that the basis of thermal expansion and contraction without affecting the surface of the silicon PU ). Silicon pu Stadium, Shaanxi satellite sports, water-based silicon pu stadium construction program provided by satellite Sports Facilities Co., Ltd. in Shaanxi. Silicon pu Stadium, Shaanxi satellite sports, water-based silicon pu stadium construction program in Shaanxi satellite sports facilities Limited (www.sxwxty.com) (www.sxwxty.com) this year introduced a new upgrade, the above picture is for reference only, please call Tel This page or image on to obtain the latest information, contact: Liu Bin.